All in One Printer User Manual
Table Of Contents
- Preface
- The manuals for your machine
- Contents
- How to read this manual
- Regulatory information
- Limited warranty
- Precautions
- Chapter1 Layout & Installation
- Chapter2 Getting started
- Chapter3 Autodialler
- Chapter4 Sending faxes
- Chapter5 Receiving faxes
- Chapter6 Using F-code box features
- F-code: an introduction
- Creating or modifying an F-code box
- Printing a list of F-code boxes
- Printing a list of documents stored in your F-code boxes
- Erasing an empty F-code box
- Storing a document in a bulletin box for polling
- Printing a document stored in a bulletin box
- Erasing a document stored in a bulletin box
- Printing a document received in the security box
- Sending a document using a subaddress and password
- Polling a document using a subaddress and password
- Chapter7 Copying
- Chapter8 Special features
- Chapter9 Security features
- Security features
- Using department codes
- Turning department code protection ON and OFF
- Entering a department code
- Erasing a department code
- Turning the department code setting on and off
- Fax charge setting
- Copy charge setting
- Sending a fax using a department code
- Making a copy using a department code
- Printing the department code list
- Resetting the department code counter
- Copy protection
- Chapter10 User settings
- Chapter11 Report & Lists
- Chapter13 Maintenance & Problem solving
- Appendix & Index
10-3us e r s e t t I n G s
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
us e r s e t t I n G s
07. Primary Mode The machine returns to the primary mode when the standby status contin-
ues for longer than 3 minutes after finishing the sending or printing jobs.
With this setting, the machine always starts up in the primary mode.
In default settings, the copy mode is set for the primary mode. However,
you can change the primary mode to the fax mode or to the scan mode.
08. Service Mode For technical support. Do NOT change this setting without an autho-
rized technician’s advice.
09. Date & Time Enter the current date and time using 24-hour format.
10. Paper Source
Sets the usage rules for the paper cassettes and bypass tray.
Cassette1 You can choose one of the following for cassette 1.
Fax/Copy Used for fax printing, list printing and copying.
Not Used Cassette 1 is not used for faxing and copying.
Can be used for the separator page function
(page 5-14) or PC printing.
Fax Used only for fax printing and list printing.
Copy Used only for copying.
Cassette2 You can choose one of the following for cassette 2.
Fax/Copy Used for fax printing, list printing and copying.
Not Used Cassette 2 is not used for faxing and copying.
Can be used for the separator page function
(page 5-14) or PC printing.
Fax Used only for fax printing and list printing.
Copy Used only for copying.
Bypass tray You can choose one of the following for Bypass tray.
Fax/Copy Used for fax printing, list printing and copying.
Not Used Bypass tray is not used for faxing and copying.
Can be used for the separator page function
(page 5-14) or PC printing.
Fax Used only for fax printing and list printing.
Copy Used only for copying.
NOTE:
•The“Cassette2”appearsonlywhentheoptionalsecondcassettehasbeeninstalled.
•FordetailsofPCprinting,refertothePDFmanualontheGDIPritner/ScannerDriver
CD supplied with the machine.
11. Page Counter Displays the total number of printed and scanned page (page 8-8).