All in One Printer User Manual

ManualsBrandsMuratec ManualsAll in One PrinterF-315

Table Of Contents

Preface
The manuals for your machine
Contents
How to read this manual
Regulatory information
Limited warranty
Precautions
- Installing the machine
- Caution labels and indicators
- Transporting the machine
- Consumables
- Routine Maintenance
- Ventilation
- Product Recycling and Disposal
Chapter1 Layout & Installation
- Packing contents
- Machine layout
- Control panel overview
- Setting up the machine
- Initial setup
- Installing drivers [CD]
Chapter2 Getting started
- Operating tips
- Document and paper handling
  - Document handling
  - Paper handling
Chapter3 Autodialler
- Autodialer basics
- One-touch keys
- Speed-dial numbers
- Call group dialing
- Phone directory dialing
  - How to dial using the phone directory
  - If the call fails
Chapter4 Sending faxes
- Before sending
- Sending a fax
  - Memory transmission
  - Real-time transmission (non memory transmission)
- Redialing
  - Automatic fax redialing
  - Manual redial
- Reviewing or canceling commands
- Advanced fax functions
Chapter5 Receiving faxes
- Receiving a fax
- Settings for fax reception
  - Setting the number of rings
  - Print settings
- Advanced receiving functions
Chapter6 Using F-code box features
- F-code: an introduction
- Creating or modifying an F-code box
- Printing a list of F-code boxes
- Printing a list of documents stored in your F-code boxes
- Erasing an empty F-code box
- Storing a document in a bulletin box for polling
- Printing a document stored in a bulletin box
- Erasing a document stored in a bulletin box
- Printing a document received in the security box
- Sending a document using a subaddress and password
- Polling a document using a subaddress and password
Chapter7 Copying
- Before copying
- Making copies
  - Making copies using the ADF
  - Making copies using the document glass
- Basic copy settings
- Advanced copy functions
Chapter8 Special features
- Soft keys
  - Functions you can assign to a soft key
  - Programming a soft key
- Macro keys
- Viewing counters
Chapter9 Security features
- Security features
- Using department codes
- Copy protection
Chapter10 User settings
- Machine settings
  - Accessing the machine setting
- Fax settings
  - Accessing the fax settings
- Copy settings
  - Accessing the copy setting
- Scanner settings
  - Accessing the scanner setting
Chapter11 Report & Lists
- Table of the lists and journal
- Activity journal
- Transmission Confirmation Report
  - Setting the transmission confirmation report
- Stored document list
- Erased document notification
Chapter13 Maintenance & Problem solving
- Maintenance
- Troubleshooting
Appendix & Index
- Specifications
- Index

Routine Maintenance

•Donotburntonercartridges.Exposuretoanopenamecancausethetonercartridge

to burn or explode, causing serious injury.

• Thefuserunitandtheareaarounditinsidethemachineareextremelyhotwhenoper-

ating. When you clear a paper jam or inspect inside, be careful not to touch around the

fuser unit. It may cause burns.

•Whenyouclearapaperjamorreplacethetonercartridge(ortonerbottle),becareful

not to get the toner powder into your eyes or mouth. If the toner gets in your eyes or

mouth, immediately ﬂush with cold water an d consult a physician.

•Becarefulnottostainyourhandsorclotheswiththetoner.Ifyourhandsorclothes

get stained, wash them immediately with cold water. The stains may become perma-

nent if washed using warm water.

•Donotattemptmachineoperationsthatarenotdescribedinthismanual.

Ventilation

•Alwaysoperatetheproductinwellventilatedareas.

Operating the product in poorly ventilated areas for an extended time period could

pose health risks. Be sure to frequently ventilate the operating area.

•Donotletanyobjectobstructorplugthe ventilationholesofthisproduct.Accumu-

lated heat inside the product could result in a malfunction.