All in One Printer User Manual
Table Of Contents
- Preface
- The manuals for your machine
- Contents
- How to read this manual
- Regulatory information
- Limited warranty
- Precautions
- Chapter1 Layout & Installation
- Chapter2 Getting started
- Chapter3 Autodialler
- Chapter4 Sending faxes
- Chapter5 Receiving faxes
- Chapter6 Using F-code box features
- F-code: an introduction
- Creating or modifying an F-code box
- Printing a list of F-code boxes
- Printing a list of documents stored in your F-code boxes
- Erasing an empty F-code box
- Storing a document in a bulletin box for polling
- Printing a document stored in a bulletin box
- Erasing a document stored in a bulletin box
- Printing a document received in the security box
- Sending a document using a subaddress and password
- Polling a document using a subaddress and password
- Chapter7 Copying
- Chapter8 Special features
- Chapter9 Security features
- Security features
- Using department codes
- Turning department code protection ON and OFF
- Entering a department code
- Erasing a department code
- Turning the department code setting on and off
- Fax charge setting
- Copy charge setting
- Sending a fax using a department code
- Making a copy using a department code
- Printing the department code list
- Resetting the department code counter
- Copy protection
- Chapter10 User settings
- Chapter11 Report & Lists
- Chapter13 Maintenance & Problem solving
- Appendix & Index
1-5La y o u t & In s t a L L a t I o n
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
La y o u t & In s t a L L a t I o n
8
Doc. Size
When using the ADF: Instructs the machine to scan Auto*, Letter, Half-letter or Legal size docu-
ments.
* When you select Auto, custom size documents (up to 35.43 in. (900 mm) in
length) can be automatically scanned.
When using the document glass*: Instructs the machine to scan Letter, Half-letter or Legal size
documents.
* The document glass is available only for the MFX-1950
9
Doc. Resolution
Selects the fax and copy resolution.
10
Contrast
Adjusts the scanning contrast level.
11
Menu /Back
Accesses machine settings. Also, it allows you to go back to the previous menu level.
12
Cursor keys
<p>(Redial): Scrolls through recently dialed numbers (page 4-7).
<
q
>(Tel Index): Displays one-touch and speed-dial entries which are sorted alphanumerically,
similar to a phone directory (page 3-11).
In copy and scan mode —
<p> <
q
>: Adjusts the zoom ratio.
13
Enter
Selects or confirms settings.
14
Cancel
Deletes characters on the LCD and cancel commands you have entered into the machine.
15
Soft keys
Frequently used functions can be assigned into the following keys.
The following are the default settings:
MFX-1950 F-315
Soft key 1 Sort Report
Soft key 2 Bypass Monitor
Soft key 3 Combine Pause /Dial Opt.
(See “Soft keys” on page 8-2 for more information.)
16
Advanced Functions
You can choose any function that is not assigned as a soft key. The displayed functions may vary
according to the mode the machine is in.
17
Speed Dial /Group
Press this key once and enter the three-digit code to dial a pre-registered fax or phone number.
Also, press this key twice and enter a group number to perform group dialing.
18
Job Confirm. /Fax Cancel
Cancel or review fax jobs, or review the results of a fax transmission.
19
Numeric keys
Enter numerical values as well as fax/phone numbers and characters.
20
Reset
Returns the menu to the standby screen and resets all settings back to their defaults.
21
Start
Executes operation.
22
Stop
Stops the machine’s operation. However, to stop a fax transmission, press <Job Confirm. /Fax Can-
cel>.