All in One Printer User Manual
Table Of Contents
- Preface
- The manuals for your machine
- Contents
- How to read this manual
- Regulatory information
- Limited warranty
- Precautions
- Chapter1 Layout & Installation
- Chapter2 Getting started
- Chapter3 Autodialler
- Chapter4 Sending faxes
- Chapter5 Receiving faxes
- Chapter6 Using F-code box features
- F-code: an introduction
- Creating or modifying an F-code box
- Printing a list of F-code boxes
- Printing a list of documents stored in your F-code boxes
- Erasing an empty F-code box
- Storing a document in a bulletin box for polling
- Printing a document stored in a bulletin box
- Erasing a document stored in a bulletin box
- Printing a document received in the security box
- Sending a document using a subaddress and password
- Polling a document using a subaddress and password
- Chapter7 Copying
- Chapter8 Special features
- Chapter9 Security features
- Security features
- Using department codes
- Turning department code protection ON and OFF
- Entering a department code
- Erasing a department code
- Turning the department code setting on and off
- Fax charge setting
- Copy charge setting
- Sending a fax using a department code
- Making a copy using a department code
- Printing the department code list
- Resetting the department code counter
- Copy protection
- Chapter10 User settings
- Chapter11 Report & Lists
- Chapter13 Maintenance & Problem solving
- Appendix & Index
1-15La y o u t & In s t a L L a t I o n
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
La y o u t & In s t a L L a t I o n
Dial tone detection
12
The machine asks you to set whether the machine should detect a dial tone before
dialing.
DialTone Detect :Off
/
/Enter
13
Normally select “Off”. If you need to detect a dial tone when dialling, select “On”,
however you cannot send a fax if there is no dial tone.
14
Press <Enter> to save the setting and continue.
Phone dial type
15
The machine will ask you to set the dialing type needed for the fax machine, either
tone or pulse.
Phone Type :Tone
/
/Enter
16
Press <q> or <p> to select the dialing type on your phone line, then press <Enter> to
save the setting.
Your fax number
17
The machine will not ask you to enter your fax number to display on the recipients
display or printed fax documents.
Your Fax Number
+1-972-364-3350_
18
Use the numeric keys to enter your fax number. This number can contain up to 20
characters.
•Toentera“+”symbolbeforeyourcountrycode:
For MFX-1950 — Press <Advanced Functions> repeatedly until “Pause /Dial Opt.”
is displayed on the LCD then press <Enter>.
For F-315 — Simply press <Pause /Dial Options>.
•Toenterthehyphen“–”tomakelongnumberseasiertoread:
For MFX-1950 — Press <Advanced Functions> repeatedly until “Pause /Dial
Opt.” is displayed, then press <Enter>. Repeat this procedure again to enter a “–”
character on the LCD.
For F-315 — Simply press <Pause /Dial Options> twice.
•Ifyoumakeamistake,press<Cancel>toerasethedigitontheleft.
•Tochangejustonenumber,press<t> or <u> to move the cursor, press <Cancel>
to erase the number. Then re-enter the fax number correctly.
19
Press <Enter> to save the number.
TTI (your name)
20
The machine will now ask you to enter the name (or company name) to be shown at
the top of faxes you send. You can enter three different names. Each name can store
up to 22 characters.
TTI 1 ;Upper
_
Use the numeric keys to enter characters. (Refer to “Entering characters,” on page
2-2.)