All in One Printer User Manual
Table Of Contents
- Preface
- The manuals for your machine
- Contents
- How to read this manual
- Regulatory information
- Limited warranty
- Precautions
- Chapter1 Layout & Installation
- Chapter2 Getting started
- Chapter3 Autodialler
- Chapter4 Sending faxes
- Chapter5 Receiving faxes
- Chapter6 Using F-code box features
- F-code: an introduction
- Creating or modifying an F-code box
- Printing a list of F-code boxes
- Printing a list of documents stored in your F-code boxes
- Erasing an empty F-code box
- Storing a document in a bulletin box for polling
- Printing a document stored in a bulletin box
- Erasing a document stored in a bulletin box
- Printing a document received in the security box
- Sending a document using a subaddress and password
- Polling a document using a subaddress and password
- Chapter7 Copying
- Chapter8 Special features
- Chapter9 Security features
- Security features
- Using department codes
- Turning department code protection ON and OFF
- Entering a department code
- Erasing a department code
- Turning the department code setting on and off
- Fax charge setting
- Copy charge setting
- Sending a fax using a department code
- Making a copy using a department code
- Printing the department code list
- Resetting the department code counter
- Copy protection
- Chapter10 User settings
- Chapter11 Report & Lists
- Chapter13 Maintenance & Problem solving
- Appendix & Index
1-16 La y o u t & In s t a L L a t I o n
If you make a mistake, press <Cancel> to erase to the left.
To change just one character, press <t> or <u> to move the cursor, press <Cancel> to
erase it. Then re-enter the correct character.
21
Press <Enter>.
TTI 2 ;Upper
_
If you do not want to enter TTI 2, skip to step 23.
22
Use the numeric keys to enter the name for TTI 2.
23
Press <Enter>.
TTI 3 ;Upper
_
If you do not want to enter TTI 3, skip to step 25.
24
Use the numeric keys to enter the name for TTI 3.
25
Press <Enter> to save the setting and continue.
Default TTI selection
26
The machine now asks you to set the default TTI to be shown at the top of faxes you
send.
Usual TTI :TTI 1
/
/Enter
27
Press <q> or <p> to select TTI 1, TTI 2 or TTI 3.
28
Press <Enter> to save the setting and continue.
Eco mode setting
29
The machine will now ask you to set the eco mode.
Eco Mode :On
/
/Enter
Press <q> or <p> to select “On” or “Off”, then press <Enter> to save the setting.
If you select “On”, the setting is complete. Press <Reset> to return to the standby
mode.
If you need to set the “Energy Save Timing” and/or “Scanner Sleep”, select “Off” and go
to step 30.
30
The machine will show the current setting.
Energy Save Mode: On
/
/Enter
Press <q> or <p> to select “On” or “Off”, then press <Enter> to save the setting.
If you select “On”, go to step 31.
If you select “Off”, go to step 34.
31
The machine will ask you to enter the time at which the machine will go into the
energy save mode. It will automatically switch to the energy save mode after your
entered time has elapsed.