All in One Printer User Manual
Table Of Contents
- Preface
- The manuals for your machine
- Contents
- How to read this manual
- Regulatory information
- Limited warranty
- Precautions
- Chapter1 Layout & Installation
- Chapter2 Getting started
- Chapter3 Autodialler
- Chapter4 Sending faxes
- Chapter5 Receiving faxes
- Chapter6 Using F-code box features
- F-code: an introduction
- Creating or modifying an F-code box
- Printing a list of F-code boxes
- Printing a list of documents stored in your F-code boxes
- Erasing an empty F-code box
- Storing a document in a bulletin box for polling
- Printing a document stored in a bulletin box
- Erasing a document stored in a bulletin box
- Printing a document received in the security box
- Sending a document using a subaddress and password
- Polling a document using a subaddress and password
- Chapter7 Copying
- Chapter8 Special features
- Chapter9 Security features
- Security features
- Using department codes
- Turning department code protection ON and OFF
- Entering a department code
- Erasing a department code
- Turning the department code setting on and off
- Fax charge setting
- Copy charge setting
- Sending a fax using a department code
- Making a copy using a department code
- Printing the department code list
- Resetting the department code counter
- Copy protection
- Chapter10 User settings
- Chapter11 Report & Lists
- Chapter13 Maintenance & Problem solving
- Appendix & Index
2-16 Ge t t I n G s t a r t e d
4
After loading paper into the bypass tray, you need to set the correct paper size by
pressing <Bypass>.
(
For F-315, press <Advanced functions> repeatedly until “Bypass” is displayed on
the LCD and then press <Enter>.
)
Bypass Tray :Ltr
/
/Enter
5
Press <q> or <p> to select the paper size you want to use.
Bypass Tray :Ltr
/
/Enter
6
Press <Enter>.
NOTE: You can set the default paper size for the bypass tray. See step 6 of “Setting of the
paper size” below.
Setting of the paper size
Default setting: 1st cassette: Letter, 2nd cassette (option): Letter, Bypass Tray: Letter
After loading paper into the paper cassette, you need to set the correct paper size by
using the following procedure.
1
Press <Menu>, <2>, <1>, <0>, <1>, <Enter>.
1st Cassette :Ltr
/
/Enter
2
Press <q> or <p> to select the paper size you will use in the first cassette.
3
Press <Enter>.
If you have the optional second cassette, proceed to step 4.
Otherwise, skip to step 6.
4
Press <q> or <p> to select the paper size you will use in the second cassette.
2nd Cassette :Ltr
/
/Enter
5
Press <Enter>.
6
Also, you can set the default paper size for the bypass tray. Press <q> or <p> to
select the paper size for the bypass tray. After, you load the paper into the bypass
tray, you need to set the correct paper size by pressing <Bypass>.
Bypass Tray :Ltr
/
/Enter
7
Press <Enter>.
8
Press <Reset> to exit and return to the standby mode.