All in One Printer User Manual
Table Of Contents
- Preface
- The manuals for your machine
- Contents
- How to read this manual
- Regulatory information
- Limited warranty
- Precautions
- Chapter1 Layout & Installation
- Chapter2 Getting started
- Chapter3 Autodialler
- Chapter4 Sending faxes
- Chapter5 Receiving faxes
- Chapter6 Using F-code box features
- F-code: an introduction
- Creating or modifying an F-code box
- Printing a list of F-code boxes
- Printing a list of documents stored in your F-code boxes
- Erasing an empty F-code box
- Storing a document in a bulletin box for polling
- Printing a document stored in a bulletin box
- Erasing a document stored in a bulletin box
- Printing a document received in the security box
- Sending a document using a subaddress and password
- Polling a document using a subaddress and password
- Chapter7 Copying
- Chapter8 Special features
- Chapter9 Security features
- Security features
- Using department codes
- Turning department code protection ON and OFF
- Entering a department code
- Erasing a department code
- Turning the department code setting on and off
- Fax charge setting
- Copy charge setting
- Sending a fax using a department code
- Making a copy using a department code
- Printing the department code list
- Resetting the department code counter
- Copy protection
- Chapter10 User settings
- Chapter11 Report & Lists
- Chapter13 Maintenance & Problem solving
- Appendix & Index
3-10 au t o d I a L L e r & dI a L L I n G o p t I o n s
Erasing a call group
1
Press <Menu>, <1>, <3>, <2>, then <Enter>.
2
Press <q> or <p> to select the call group you want to erase.
You can also select the call group by directly entering the two-digit identifier code
(01-32).
3
Press <Enter> twice.
If you want to exit without erasing, press <Cancel>.
4
To erase another call group, repeat the procedure from step 2.
Otherwise, press <Reset> to exit and return to the standby mode.
How to dial using a call group
Press this key twice.
Enter group number.
Press <Start>.
MFX-1950 control panel
To perform call group fax dialing
1
Switch to the fax mode by pressing
<
c o p y
4
f a x
4
s c a n
>
.
2
Place the document on the ADF or the document glass.
3
When you use the document glass, select the document size by pressing <Doc. Size>.
4
Adjust the document resolution and contrast.
5
Press <Speed Dial /Group> twice.
Enter Group No.
G_
6
Use the numeric keys to enter the two-digit call group number.
7
Press <Start>.
NOTE: The document glass is available only for the MFX-1950.