All in One Printer User Manual
Table Of Contents
- Preface
- The manuals for your machine
- Contents
- How to read this manual
- Regulatory information
- Limited warranty
- Precautions
- Chapter1 Layout & Installation
- Chapter2 Getting started
- Chapter3 Autodialler
- Chapter4 Sending faxes
- Chapter5 Receiving faxes
- Chapter6 Using F-code box features
- F-code: an introduction
- Creating or modifying an F-code box
- Printing a list of F-code boxes
- Printing a list of documents stored in your F-code boxes
- Erasing an empty F-code box
- Storing a document in a bulletin box for polling
- Printing a document stored in a bulletin box
- Erasing a document stored in a bulletin box
- Printing a document received in the security box
- Sending a document using a subaddress and password
- Polling a document using a subaddress and password
- Chapter7 Copying
- Chapter8 Special features
- Chapter9 Security features
- Security features
- Using department codes
- Turning department code protection ON and OFF
- Entering a department code
- Erasing a department code
- Turning the department code setting on and off
- Fax charge setting
- Copy charge setting
- Sending a fax using a department code
- Making a copy using a department code
- Printing the department code list
- Resetting the department code counter
- Copy protection
- Chapter10 User settings
- Chapter11 Report & Lists
- Chapter13 Maintenance & Problem solving
- Appendix & Index
5-7re c e I v I n G f a x e s
1
2
3
4
5
7
8
9
10
11
12
13
14
A
6
re c e I v I n G f a x e s
Paper save function:
•Half-page reception
Half-page reception can conserve paper if some of the faxes you receive are half-page,
“Memo-sized” messages. When activated, this feature tells the machine to combine two
of these half-page receptions onto a single sheet.
Half-page reception only combines half-page messages sent back-to-back during the
same transmission. It won’t combine two half-page faxes from separate transmissions.
•Duplex reception
Duplex reception can save paper by duplex printing received faxes.
When activated, this feature tells the machine to combine and print the received two
pages onto both sides of a single sheet. This feature is available only for the MFX-1950.
To adjust the print settings
Default setting:
Rx reduction rate: “Auto”, Reduction margin: “40 mm”, Half-page reception: “Off” (Paper
save: “Off”).
1
Press <Menu>, <2>, <2>, <0>, <2>, then <Enter>. The machine shows the current
reduction rate for fax reception:
Rx Reduc. Rate :Auto
/
/Enter
2
Press <q> or <p> to select the reduction rate.
3
Press <Enter> to save the setting.
The machine shows the current reduction margin:
Margin
(00-85): 40 mm
4
Use the numeric keys to enter the reduction margin you want.
5
Press <Enter> to save the setting.
The machine shows the current setting for half-page reception:
Half Page Recpt.:Off
/
/Enter
If your machine is a duplex model, the machine shows the current setting for the
paper save function.
Paper Save:Off
/
/Enter
6
Press <q> or <p> to select the paper save function.
7
Press <Enter> to save the setting.
8
Press <Reset> to return to the standby mode.