User manual

Getting started
1.37
4.
Press ENTER.
5.
Then, if necessary, press PAPER SIZE
?
again to select a same size of recording
paper you place document on the
ADF
or
FBS
. You can select either A4-, A5-,
A5R- or B5-sized paper.
T:OHP 100%
T:B5 100%
T:A5 100%
T:A5 100%
Copy Ready Num: 1
T:A4 100%
Note: When you set the transparency film, please select “OHP” mode.
You can use the A4-sized transparency film.
6.
If necessary, select desired resolution, contrast, reduction/enlargement rate.
(See “Setting of enlargement or reduction for copying,” right column.)
7.
Press START to begin the copying process.
Setting of enlargement or reduction
for copying
Your fax machine is capable of enlargement and reduction when copying.
Note: The copy enlargement and reduction rate setting is available only for copying,
not for faxing.
Important: Copy enlargement is available only for copying using the
FBS
; it is not
available for copying using the
ADF
.
To change the reduction or enlargement rate for copying, either select a pre-set rate or
directly enter a rate.
Selecting a pre-set rate
Either . . .
• Press
ENLARGE to select one of the following fixed enlargement rates.
100% 115% 122% 141% 172% 200%
115%: B5 → A4
122%: A4 → B4, A5 → B5, A5R → B5R, B5 → A4
141%: B5 → B4, A5 → A4
172%: A5 → B4
. . . or . . .
• Press
REDUCE to select one of the following fixed reduction rates.
100% 86% 81% 70% 50%
86%: A3 → B4, A4 → B5, A4R → B5R
81%: B4 → A4, B5 → A5, B5R → A5R
70%: A3 → A4, B4 → B5, A4 → A5, A4R → A5R
50%: A3 → A5