User manual

Beyond the basics
2.37
Keeping things secure
Your machine has a number of features to enhance the security of your fax
communications. These security features can help you let your private fax documents
stay private, avoid unwanted outside communication and even protect against
unauthorised use of your machine — as well as control its authorised use.
Note:
The features mentioned in “Keeping things secure” work only between
Muratec machines. For secure communications that are possible between your
machine and other makers’ machines, see “F-Code communications,” pages
2.50–2.60.
The key to it all: the passcode
Your machine has a protection passcode system which, as you’ll see, is central to the
machine’s security capabilities. Normally, this four-digit passcode is set to 0000 (four
zeroes). This turns off passcode operation. But, if you set the passcode to anything
besides 0000, this passcode provides access to numerous other security capabilities
we’ll describe in succeeding pages.
To set your machine’s passcode:
1.
If the machine is in Fax mode, proceed to step 2.
If it is in Copy mode, press
COPY
/
FAX
to change to Fax mode.
2.
Decide upon, and then write down the four-digit passcode (0001-9999) you
want to use and put it in a safe place.
Important:
Do not use 0000. This turns off passcode protection.
3.
Press
PROGRAM
,
J
,
1
,
7
,
ENTER
. The display will show:
Protect Passcode
Old Passcode: ****
4.
If you are creating the passcode, use the numeric keypad to enter 0000.
If you are modifying an existing passcode, enter the existing passcode.
5.
Press
ENTER
.
6.
Enter the desired four-digit passcode. Here, we’ve entered 6296:
Protect Passcode
New Passcode: 6296
7.
Press
ENTER
to save the passcode.
Note:
Anytime you want to turn off the passcode, change the passcode back to 0000
by repeating steps 1–7 and entering 0000 in step 6.
Locking up tight: operation protection
Important:
For this feature to work, you must have set the passcode, as described in
the left column.
Because this is a powerful machine you have here — and, besides, you’re paying for
its phone calls — you may not want just anybody to use it. That’s why we’ve
provided operation protection. When this feature is activated, only those who enter
the proper passcode (see “The key to it all: the passcode,” left column) can send faxes
from — or even make settings on — the machine.
Activating operation protection
1.
If the machine is in Fax mode, proceed to step 2.
If it is in Copy mode, press
COPY
/
FAX
to change to Fax mode.
2.
Press
PROGRAM
,
J
,
1
,
8
,
ENTER
. The display shows:
Set Opr. Protect
Enter Passcode :****
3.
Use the numeric keypad to enter the passcode. Here, we’ve entered 6296:
Set Opr. Protect
Enter Passcode :6296
4.
Press
ENTER
. The display shows:
Opr.Protect: Off
Program/Enter
If the setting you see is acceptable, skip to step 6.
Otherwise, proceed to step 5.
5.
To change the setting, press
PROGRAM
once or twice until your desired setting
appears. In this example, we’ve chosen “On.”
Opr.Protect: On
Program/Enter
6.
Press
ENTER
to save the setting.