User manual

Changing the dialling pause length
Default setting: 2 sec.
The pause is set by the factory to last two seconds,but you can set it to last as long
as ten seconds if necessary. To change the pause length:
1
Press MENU , J , 0, 4, [Enter].
2
Use the numeric keypad to enter the length
you want for the dialling pause.
Note: The length setting requires two digits.
Always enter a leading zero for
lengths less than 10 seconds.
3
Press ENTER to save the setting.
Changing redial settings
Default setting: Number of redial: 2 times, Redial interval: 3 minute.
It’s up to you how many times the fax redials a number and how long it waits
between redials (that length of time between calls is the redial interval).
To program the redial settings:
1
Press MENU , J , 0, 6, [Enter].
2
Use the numeric keypad to enter the number
of redials you want. Choose from 2 to 5 redi-
als.
3
Press [Enter] to save the setting.
4
Use the numeric keypad to enter the length
you want between redial attempts. Choose
from 3 to 5 minutes.
5
Press [Enter] to save the setting.
6
Press RESET to return to standby mode.
Entering settings for your machine
3.6
Settings for dialling