Fax Machine User Manual

Just in case
If the platen cover is blinking on the LCD :
1
Open the platen cover.
2
Open the ADF cover by holding the ADF cover release.
3
Remove the original document from the
machine by turning the green dial
toward right or left.
CAUTION:
Be careful not to put your hand
under the platen cover and the
ADF cover.
4
Confirm that any document does not remain in the ADF cover, and then close
the ADF cover and the platen cover.
5
Follow steps 6–7 on page 5.1.
If a printout jams
If a printout jam occurred during printing,an alarm sounds and the part the paper
jammed will blink on the LCD . Please remove the jammed paper carefully as below.
CAUTION: The fuser unit becomes very hot. Do not touch the fuser unit
when you are removing a paper jam.
Important: Do not touch the electrical contacts
inside the printer cover or under the
drum cartridge, as an electrostatic dis-
charge may damage the machine.
When the paper jammed inside the machine
1
Open the printer cover by holding the
printer cover release (R1).
2
Open the fuser cover by pressing the
fuser cover release (R
2).
CAUTION:
The fuser unit becomes very hot.
Do not touch the fuser unit
when you are removing a paper
jam.
Electrical Contacts
Open & Check
the blinking
cover.
Document jam
5.2