1700

ManualsBrandsMuratec ManualsAll in One PrinterMFX-1300/1700

Advanced features

Programmable one-touch keys

Using the power of programmable one-touch keys

In order to complete some operations on your machine, you may have to follow several

step s and press several dif ferent buttons. But programming your machine s one-touch

keys (P 1 and P 2 ) can reduce those many steps to a simple press of a key.

Y ou can teach the one-touch keys to carry out any of the following operations:

Communications functions:

Delayed transmission (explained on pages 3.10)

Broadcasting (page 3.9)

Regular polling (p ages 3.14 3.15)

Batch transmission (pages 3.11 3.13)

F-Code transmission (page 3.33)

F-Code polling (p age 3.34)

To teach these keys, you tell the machine four simple things:

H o w The key you re programming

W h o The number(s) the machine should dial

What The operation it should perform

When The date(s) and time(s) when you want it to perform the operation

Printouts:

Machine settings list (p age 4.11)

Fax settings list (p age 4.11)

Copy settings list (p age 4.11)

Activity journal (p age 3.21)

Delayed commands list (page 2.8)

One-touch list (p age 3.3)

S peed-dial list (p age 3.5)

Programmable one-touch numbers list (page 3.48)

Call group directory (p age 3.7)

Blocked numbers list (p age 3.54)

Sample cover page (page 3.22)

D e p artment time list (p age 3.56)

List of F-Code boxes (p age 3.29)

List of documents stored in F-Code boxes (p age 3.29)

Batch box list (p age 3.12)

List of stored batch document s (p age 3.12)

Macros list (p age 3.19)

Document storage:

Regular polling documents (page 3.14)

F-Code polling documents (page 3.29)

Programming a delayed transmission

To program a delayed transmission into a programmable one-touch key:

Press Program key,

, 3, 0, 1,

ENTER

.The

LCD

shows the first empty programma-

ble one-touch number available:

Note: If P 2 appears on the

LCD

, it means that you have already entered a num -

ber for P 1 . You can see what you programmed into P 1 by pressing , if

you want. For example, if you set P 1 for storing of the polling document,

you will see:

Press to go back to the programmable one-touch key you want to

enter.

Note: To erase a programmable one-touch key, see p age 3.48.

Press the key that you want to program or change. Here, we ve selected P 2 .

Note: If you re changing a previously stored command: If your previous com -

mand for this key was a for a delayed operation, and you want to keep

this key programmed for a delayed operation, use these instructions to

make changes. But if you want to assign this key to a completely dif ferent

operation for batch transmission, then you must first erase the stored

command before programming the new one.

If you want to select a dif ferent programmable one-touch key than what appears

on the

LCD

, press that key now.

Select Program No.

P2:No Number Stored

Select Program No.

P1:Polling Document

Select Program No.

P2:No Number Stored

3.35