Printer/Fax/Scanner/Copier Operating Instructions MFX-1300/1700
Advanced features
17
Press
ENTER
. The
LCD
asks you for the type of confirmation report you want to set
for this programmable one-touch number.
18
Press until the mode you want appears.
19
Press
ENTER
. The
LCD
asks if you want to send a cover p age for this programma-
ble one-touch number.
20
Press until the mode you want appears.
21
Press
ENTER
. The
LCD
asks if you want to turn the Fax & Copy feature on or of f for
this programmable one-touch number.
Note: When the memory transmission is set to off in step 15, this
LCD
will not
appear and go to step 24.
22
Press until the mode you want appears.
23
Press
ENTER
.
24
Press
STO P
to return your machine to st andby mode.
Programming a broadcast / group
Programming a broadcast is very similar to programming a delayed transmission. But
instead of sending to just one phone number, you set up multiple numbers for the trans -
mission.
To program a broadcast / group into a programmable one-touch key:
1
Press Program key,
A
, 3, 0, 1,
ENTER
.The
LCD
shows the first empty programma-
ble one-touch number available:
Note: If P 2 appears on the
LCD
, it means that you have already entered a num -
ber for P 1 . You can see what you programmed into P 1 by pressing , if
you want. For example, if you set P 1 for storing of the polling document,
you will see:
Press to go back to the programmable one-touch key you want to
enter.
Note: To erase a programmable one-touch key, see p age 3.48.
2
Press the key that you want to program or change. Here, we ve selected P 2 .
Note: If you re changing a previously stored command: If your previous com -
mand for this key was a for a broadcast/group transmission, and you
want to keep this key programmed for a broadcast/group transmission,
use these instructions to make changes. But if you want to assign this
key to a completely dif ferent operation for batch transmission, then you
must first erase the stored command before programming the new one.
3
If you want to select a dif ferent programmable one-touch key than what appears
on the
LCD
, press that key now.
4
Press
ENTER
.The
LCD
asks which operation you want to program into the pro -
grammable one-touch:
Note: If changing a previously stored command, skip to step 7.
Type :Communication
/
/Enter
Select Program No.
P2:No Number Stored
Select Program No.
P1:Polling Document
Select Program No.
P2:No Number Stored
Fax & Copy :---
/
/Enter
Cover Page :---
/
/Enter
Report :---
/
/Enter
3.37