Specifications

3-50
Unique Switch e:2 - Scanner
Switch
Initial
Setting
Adjust Usage/Comments
7 0 Factory use only
6 1 Factory use only Note: Initial setting for MFX-1700 is “0”.
5 0 Continuous lighting of the
lamp for CCD adjustment
(Only for MFX-1700/1600)
0: No
1: Yes
Setting at “1”, the lamp continues to light when the
setting of Background Level.
After using this switch, it must be set at “0” after turn
the power off/on.
4 0 Initial setting of Copy
resolution
(Only for MFX-1700/1600)
0: 600 × 400 dpi
1: 600 × 600 dpi
When set to “1”, copy resolution changes into 600 ×
600 dpi.
3 0 Factory use only
2 0 Factory use only
1 0 Mirror carriage home position
0: FBS
1: ADF
This switch is only effective when the unique switch
E:2 bit 0 is set at “0”.
Determines the Mirror carriage home position.
0 1 Mirror carriage home position
0: Fixed
1: Variable
Determines the Mirror carriage home position.
Note: These settings effect after turn the power switch off/on.
Unique Switch e:3 --- Factory use only
Unique Switch e:4 - Scanner
Switch
Initial
Setting
Adjust Usage/Comments
7 0 Factory use only
6 0 Factory use only
5 0 Factory use only
4 0 Factory use only
3 0
2 0
1 0
0 0
Leading edge document
margin adjustment for
copying using ADF or FBS
(Only for MFX-1700/1600)
Each setting changes
by 0.847mm.
Switch 3 2 1 0 Settings
1 1 1 1 12.705 mm
1 1 1 0 11.858 mm
| |
| |
0 0 1 0 1.694 mm
0 0 0 1 0.847 mm
0 0 0 0 0 mm