Specifications

3-69
3.12.3 LCD Test
This mode displays two test patterns in LCD.
1. Press Program key, *, B(02). Then press One-touch C.
LCD Test
Pressing START, all dots turn on.
Next pressing START, all dots turn off.
Finally pressing START, the alphabetical characters are shown in the LCD.
ABCDEFGHIJKLMNOPQRST
UVWXYZabcdefghijklmn
2. Press STOP to exit the test mode.
3.12.4 Key Panel Test
1. Press Program key, *, B(02). Then press One-touch D(04).
Key Panel Test
2. As each button on the keypad is pressed, a representative name as show in the following table will be
displayed.
Key Indication in LCD Key Indication in LCD
DOCUMENT
RESOLUTION
Document/Resolution COPY RESET Copy Reset
CONTRAST Contrast START Start
DOCUMENT SIZE Doc Size STOP Stop
PAPER SIZE
NEXT DOC
Paper Size/Next Doc Soft key 1, 2 and 3 Soft Key 1, 2 and 3
CANCEL Cancel REDIAL/PAUSE Redial
ENTER Enter DIALING
OPTIONS
Dialing Op.
BROADCAST Broadcast
GROUP Group
ADVANCED
FUNCTIONS
Advanced Functions
MACRO PROGRAM Macro program
COPY/FAX Copy/Fax Macro keys M1 and M2
P (Program key) Program Numeric keys 0
through #
0 through #
SPEED DIAL
/TEL INDEX
Speed One-touch keys 01
through 55
[01] through [55]
REVIEW
COMMANDS
Review Command Programmable One-
touch keys P1 and
P2
[P1] and [P2]
3. Press STOP twice to cancel the key panel test.