All in One Printer User Manual

ManualsBrandsMuratec ManualsAll in One PrinterMFX-C2700

101

102

103

104

105

106

107

108

109

110

Table Of Contents

Preface
Emergency first aid
Manufacturer
Contents
Notes, cautions and warnings
About this guide
- Documentation suite
- Purpose of this guide
- On-line usage
- Printing pages
Introduction
- Overview
  - Front view
  - Rear view
- Control panel
- Keypad - character switching
- Qwerty keyboard
- Changing the display language
Getting started
- Switching on
- Switching off
- Power saving mode
- Sleep mode
- Installing drivers and utilities
Paper recommendations
- Cassette trays
- Multi purpose tray
- Face down stacker
- Face up stacker
- Duplex
Loading paper
- Cassette trays
- Multi purpose tray
- Configuring the tray settings
- Registering custom sizes
User authentication and access control
- PIN authentication
  - Logging into the machine
  - Logging out of the machine
- User name and password authentication
Operation
- Multi-tasking
- Loading document(s)
Copying
- Basic operation
  - Increasing copy count
- Advanced operation
- Resetting copy settings
  - Auto reset
  - Using the reset/logout button
Scanning
- Scan to e-mail
- Scan to network PC
- Scan to USB memory
- Scan to local PC
  - Actkey interface
- Scan to remote PC
- Managing profiles
  - Adding a new network profile
  - Deleting a network profile
- Managing the address book
Printing
- Job lists
- Print job
- Print from USB memory
  - Basic operation
  - Advanced operation
- Switching online/offline
Faxing
- Sending a fax from the MFP
- Managing the phone book
- Internet fax
Functions common to copy, fax and scan operations
- Continuous scan mode
- Job macros
Maintenance
- Replacing consumable items
- Cleaning
Installing upgrades
- Memory upgrade
- SD card
- Additional paper tray
- Setting the driver device options
  - Windows
  - Mac OS X
Troubleshooting
- Checking the machine’s status
- Checking the device and job status
- Clearing paper jams
  - In the scanner ADF section...
  - In the printer section...
- Dealing with unsatisfactory printing
- Dealing with unsatisfactory copying
- Fax problem checklist
Specifications
Appendix A - menu system
- Reports
- Paper setup
- Address book
- Phone book
- Profile
- Network scan destination
- Store document settings
- View information
- Shutdown
- Easy setup
- Admin setup
Index
- A
- B
- C
- D
- E
- F
- I
- L
- M
- O
- P
- S
- T
- U
Muratec contact details

Maintenance > 105

USER

REPLACEMENT

The fuser is located inside the printer just behind the toner cartridges.

Switch off the MFP and allow the fuser to cool for about 10 minutes before opening the

cover. Refer to “Switching off” on page 18 for details.

1. Gently raise the scanner.

2. Press the cover release (a) and open the top cover (b) fully.

3. Identify the fuser handle (a) on the top of the fuser unit.

4. Pull the two fuser retaining levers (b) towards the front of the printer so that they

are fully upright.

5. Holding the fuser by its handle (a), lift the fuser straight up and out of the printer. If

the fuser is still warm, place it on a flat surface which will not be damaged by heat.

6. Remove the new fuser from its packaging and remove the transit material.

WARNING!

If the MFP has recently been powered on, some fuser components

will be very hot. Handle the fuser with extreme care, holding it only

by its handle, which will only be mildly warm to the touch. A

warning label clearly indicates the area.