User Manual

1-30 GETTING STARTED

After loading paper into the bypass tray, you need to set the correct paper size.

(See “Setting the paper size,” below.)

NOTE:

You can also set the paper size for bypass tray by pressing [Bypass] in the Copy

standby mode.

Setting the paper size

Default setting: 1st cassette: Letter, 2nd cassette (option): Letter, Bypass Tray: Letter

After loading paper into the paper cassette/bypass tray, you need to set the correct

paper size on the control panel by using the following procedure.

Press [Setting].

Press [Paper Settings].

 Setting the paper type for the 1st cassette

Press [Cassette 1].