Operating instructions

IF-200 from Muratec
12
Enter the IP Address of gateway server
from the Worksheet and press OK.
The IF-200 is capable of determining its
own IP address (if supported by your LAN)
using DHCP, RARP, an Auto Assign
method or a Static IP (manual input from
the keypad). Use the PREV and NEXT
keys to select the method of determining
the IF-200’s IP address.
Enter the IP address of the Primary DNS
server (Domain Name Server) from the
Worksheet and press OK.
Enter the IP address of the Secondary DNS
(Domain Name Server) from the
Worksheet and press OK (this field is
optional, to skip, leave blank and press
OK).
Enter the name or IP address of the SMTP
(Simple Mail Transport Protocol server)
from the Worksheet and press OK. This is
how the IF-200 sends mail.
Enter the name or IP address of the POP3
server (Point of Presence server) from the
Worksheet and press OK. This is how the
IF-200 receives mail.
Enter the name of the POP email account
for this IF-200 and press OK.
Enter the password for this email account.
Re-enter the password for this email
account to ensure you know the password.
The IF-200 displays its email address based
on your input. If this email address is
correct, press OK. Otherwise, press ESC to
correct the information.
Gateway IP Address:
0
.0.0.0
OK ESC
IF-200 IP Addr:
USE DHCP
0.0.0.0
OK PREV NEXT ESC
Primary DNS Addr:
0
.0.0.0
OK ESC
Secondary DNS Addr:
0
.0.0.0
OK ESC
SMTP Server Address:
_
OK ESC
POP Server Address:
_
OK ESC
POP Username:
_
OK ESC
POP Password:
_
OK ESC
POP Password:
_
Re-enter password
OK ESC
Your E-Mail Address:
*[e-mail]*
OK ESC