Operating instructions

Appendix B
29
SETTING OPTIONS AND DESCRIPTION (Default settings are in BOLD
type)
E-Mail Subject
“Muratec Fax” The subject to be listed in the header of outgoing
IP network or Internet faxes.
Prompt for Subject
Yes, No. Allows user to define subject of email. During the
sending of a fax the user is prompted to enter the subject of the
email. If no subject is entered the default subject is inserted.
E-Mail Desc 1-4 Four lines of text at the bottom of the header of outgoing IP
network or Internet faxes:
1: Internet Fax is attached from a Muratec IF-200. If needed,
2: download a free TIFF viewer from www.muratec.com. Click
on products link, then click on the link for the IF-200 product
page, where you will find the viewer download file.
3: If you have problems or questions contact
[e-mail]. Please
4: include your fax and telephone numbers so Muratec can
respond.
Lines Per Page
63. The number of lines of an e-mail text you wish to be printed
on each page.
Max Text Pages
5. Maximum number of pages of an e-mail text before it is
classified as “other” e-mail type.
Local Number
Length
0. If the number of digits in a local telephone number is specified,
then the following occurs. When a fax is sent using the FAX
SERVICE send method and the length of the telephone number is
less than or equal to the length specified, the fax is sent as a direct
fax rather than using the fax service.
Print all Text
Yes. Prints all text regardless of character set.
Route Incoming
Faxes to Email
No. Reroutes all Direct Incoming faxes to a user specified e-mail
address.
Inbound Routing
Address
E-mail address to route Direct Incoming faxes to.
Verbose
Yes, No. If enabled, communicates debugging information via the
IF-200’s SERIAL port at 38400 Baud, 8 data bits, 1 stop bit, no
parity.