Instruction manual

-- 6 --
T141e
2 INTRODUCTION
Tradesmig 141 are step controlled power sources in a compact design, intended for welding with
solid steel, stainless steel or aluminium wire as well as tubular wire with or without shielding gas.The
possibility of welding with homogeneous wire/shielding gas and welding with gasless tubular wire is
obtained by switching the + and -- connections on the switching terminal by the wire feed unit.
ESAB’s accessories for the product can be found on page 15.
2.1 Equipment
The power source is supplied with:
S Welding gun
S Return cable with return clamp
S Instruction manual
3 TECHNICAL DATA
Tradesmig 141
Voltage
230--240V, 1∼ 50/60Hz
Permissible load at
100% duty cycle 42A/16,1V
60 % duty cycle 54A/16,7V
20 % duty cycle 100A/17,0V
Setting range (DC) 35A/15,7V--83A/18,2V
(130A/13,4)
Open circuit voltage 18,7--25,1V
Open circuit power 75W
Power factor at max load 0,91
Control voltage 230--240V, 50/60Hz
Wire feed speed 2,0--14m/min
Welding gun connection fixed
Wire dimension range 0,6--0,8(Fe)
1,0 (Al)
0,8(cored)
0,8(CuSi)
Max diameter/weight
of wire bobin
200mm/5kg
Dimensions lxwxh 650x300x550
Weight 25kg
Operating temperature --10 ÷ +40
o
C
Enclosure class IP 23
Application classification
Duty cycle
The duty cycle refers to the time as a percentage of a ten--minute period that you can weld at a cer-
tain load without overloading.