Instruction manual

13
Indicator Description
Appears while using Middle output power.
Blinks when the temperature protection circuit (transmit power
save) turns on.
Appears while using Low output power.
Displays the operating frequency.
Appears when receiving a busy signal.
Performs as an S meter when receiving a signal and displays
the selected power level while transmitting.
Appears while transmitting.
Appears while using the External data band.
Appears while using the Internal data band.
Appears when the data terminal is set as 9600 bps.
Appears when the mute function is ON.
Appears while making a continuous recording.
Appears while in EchoLink Sysop mode.
Appears when the Key Lock function is ON.
Displays the PM channel number.
Appears when Weather Alert is ON.
Blinks when receiving a signal (K type only).
Appears when a message is received.
Appears when the Beacon type is set to “APRS”.
Appears when the Beacon type is set to “NAVITRA”.
Appears while in PACKET mode.
Appears when the packet transfer rate is set to 1200 bps.
Appears when the packet transfer rate is set to 9600 bps.
Appears when the Beacon function is ON.
Appears when the GPS port input is set to “GPS”.
Blinks while positioning.
Appears when the GPS port input is set to Weather Station.
Appears when Voice Alert is set to “ON”.
Appears when Voice Alert is set to “RX ONLY”.