Manual

PREPARATION
CAUTION: Do not bend the control
cables. A cable that Is bent or damaged
mum be replaced.
4. Remove the hair pin from the dght and left
handle bracket. (Figure 1)
5. Remove the lower handle from the han-
dle brackets (Figure 1).
6. Rotate the lower handle mound
(Figure 4). Mount the lower handle to the
handle brackets.
7, Installtheheirpinonthedghtandlefthan-
dle bracket (Figure1).
8. Fasten the upper handle to the lower
handle with the bolts and wlngnots
(Figure 4).
9. Secme the €ontrol cables to the lower
handle with the cable ties.
Bolt
Tab
\
Figu{n 4
F- 9e525 12