Specification

Siemens Industry, Inc. SPEEDFAX™ 2017 Product Catalog
3-33
3
MURRAY
Group Metering
Product Descriptions
Murray New York City Apartment
Metering is a versatile, unassembled
modular metering product comprised of
separate modules that may be assembled
to produce a variety of configurations.
Only those standard modules shown in
this publication will be sold. Installation
instructions are shipped with the
product. The modules are:
Meter Stacks
Meter Stacks are available from 2 to 5
meter positions, arranged vertically and
pre-bussed on the line side. Each meter
position is rated 100 amps continuous
(125 amps maximum), 5 jaw, with
the 5th jaw located at 9 o’clock and
connected to the stack neutral bus.
Indoor mounting only.
Line Troughs
Line troughs are indoor horizontal
wireways that support the meter stacks
and supply unmetered line power to
meter stack bus. Line trough is available
from 2 to 5 stack positions and may
be ganged by means of couplers to
accommodate 6 or more stacks. Phase
blocks and line terminals are required
to terminate line conductors and to
provide means to field wire each
stack. Trough end walls are ordered
separately.
Phase Blocks
Phase blocks are required to terminate
line conductors and provide terminals
for field connection to each stack bus.
Phase blocks are available with 3, 6 or
12 take-off lugs.
System Parameters
n Mounting: Indoor only
n Input: 208Y/120V AC, 3 Phase, 4 Wire or 120/240V AC,
1 Phase, 3 Wire
n Maximum line terminal- (2) 500 kcmil/phase
n Output: 120Y/208V AC, 1 Phase, 3 wire or 120/240V AC,
1 Phase, 3 Wire 100 Amps continuous/meter position (125
amps maximum)
n Meter Sockets: 5 jaw, with 5th jaw located at 9 o’clock and
electrically connected to neutral bus
n Tenant Circuit Breakers: Use Murray Type MP-T 2 pole plug-
on circuit breakers, (100 amps maximum)
Group Metering: NYC Gangable Metering
General Information