Instructions / Assembly

B
C
D
E
A
Up
Down
Low
Tall
No. A B
name
Fine Mesh Shelf Lower Pole
Parts
3 pcs 4 pcs
Leveling Feet
Plastic Clip Upper Pole
E D C
4 pcs 26 pcs 4 pcs
1
2
3
4
5 6
Screw four pieces Leveling Foot(E) into the
bottom of each Lower Pole(B). And snap the
Plastic Clips(D) on the grooves of each lower
pole at the same position. Make sure the arrow
of all the plastic clips should be pointed up.
Please make sure that you have the Fine Mesh
Shelf(A) the correct way up. Hold the shelf and
slide the top of four lower poles through the
bottom of each shelf at its corners until there is
snug fit.
Screw Upper Poles(C) into lower poles by
screw connectors which are already assembled
on the lower poles.
Refer to the Step (1) to snap plastic clips on the
grooves of four pieces lower & upper poles at
your desired positon for next fine mesh shelf.
Slide down the next fine mesh shelf from the top
of each pole down onto the plastic clips.
Refer to the Step (4) to snap the plastic clips on
the same grooves of each pole at your next
desired position for final shelf.
Pushing firmly down on every fine mesh shelves
at corners by rubber mallet to ensure all the
shelves in a place over the plastic clips. And
screw leveling feet in or out to attain proper
leveling.
QTY
2 pcs spare