Assembly Instructions

Assemble two (2) post with one (1) brace (see figure A). The
flat angled edge of the brace be facing up. Skipping one (1)
slot from the bottom, slide the tabs of the brace into the slots of
the post and tap down gently to properly seat (see figure B).
Repeat this process using two (2) post and one (1) brace.
Attach the assembled end units with two (2) beams (see figure
C). Again Skipping one (1) slot from the bottom, slide tabs of
the beams into post slots and tap down gently to properly seat.
Assembly Instructions for SR
Assembly Instructions for SR
Assembly Instructions for SR
-
-
-
100 & SR200
100 & SR200
100 & SR200
Start by adding a wood shelf to the level previously built, then
continue working by adding the second level using two (2)
beams and two (2) braces in the post slots of your desired
location. Again slide the tabs of the beams and braces into the
post slots and tap gently to properly seat.
IMPORTANT NOTE : Make sure all beams and braces are fully seated into the post slots.
IMPORTANT NOTE : Make sure all beams and braces are fully seated into the post slots.
IMPORTANT NOTE : Make sure all beams and braces are fully seated into the post slots.
Add a wood shelf to the previously built level, then assemble
the top post to the bottom post by using eight (8) of the post
couplers. Slide the couplers tabs into the top of the bottom
post, tap gently to properly seat. Slide the top post onto the
remaining tabs of the couplers, tap the top post down to prop-
erly seat (see figure D). Install the third level just above the
post couplers, using two (2) beams, and two (2) braces.
Add a wood shelf to the previously built level, then continue by
adding the fourth level to the unit using two (2) beams and two
(2) braces. Tap gently to properly seat and add the wood shelf.
Finally add the fifth level to the unit using two (2) beams and
two (2) braces. Tap gently to properly seat and add the last
wood shelf.
Step
1
Step
2
Step
3
Step
4
Figure A
Figure AFigure A
Figure A
Figure B
Figure BFigure B
Figure B
Figure C
Figure CFigure C
Figure C
Tap Lightly
Post Slot
Brace
Beam
Wood Shelf
Figure D
Figure DFigure D
Figure D
Post Coupler
Top Post
Bottom Post
Wood Shelf
Wood Shelf