Instructions / Assembly

MODELS:
UR301260PB5P-SV
UR361872PB5P-SV
UR481872PB5P-SV
UR482472PB5P-SV
(D) Wood Shelf
(A) Post
(B) Brace
5-SHELF Boltless Steel Shelving
with parcleboard shelves
Should you have any comments, damage, missing parts, or problems with assembly of this unit contact us:
Chat: www.edsal.com/chat or www.edsal.com/contact
Email: [e-mail]
Phone: [phone]
To obtain replacement parts please provide: Model Number, Part Number & Description,
Location Purchased, and Date Purchased
Edsal Manufacturing Co. LLC
Chicago, IL 60609
US Patents & Patents Pending
Rev: C063020
(C) Beam
(E) Post Joint
PARTS LIST
Qty
Model UR301260PB5P-SV
(30w x 12d x 60h)
Model UR361872PB5P-SV
(36w x 18d x 72h)
Model UR481872PB5P-SV
(48w x 18d x 72h)
Model UR482472PB5P-SV
(48w x 24d x 72h)
Descripon
Part Number Part Number Part Number Part Number
(A) Post 8 URPS30-SV URPS36-SV URPS36-SV URPS36-SV
(B) Brace 10 URBR12-SV URBR18-SV URBR18-SV URBR24-SV
(C) Beam 10 URBM30-SV URBM36-SV URBM48-SV URBM48-SV
(D) Wood Shelf 5 RPB31230 RPB31836 RPB31848 RPB32448
(E) Post Joint 4 MPC0409-SV MPC0409-SV MPC0409-SV MPC0409-SV
(F) Post Cap 8 RL-PC-B1.4 RL-PC-B1.4 RL-PC-B1.4 RL-PC-B1.4
IMPORTANT SAFETY INFORMATION
Read through this enre manual for important guidelines and instrucons prior to assembly. Failure to follow these guidelines and
instrucons can result in property damage or serious personal injuries.
This unit should be placed on a level surface. Failure to do so can result in poor product performance or create a possible safety haz-
ard. DO NOT CLIMB, STAND or USE THIS UNIT AS A LADDER. TO PREVENT TIPPING, ALWAYS SECURE TO A WALL WITH SUITABLE FAS-
TENERS, NOT INCLUDED. DO NOT USE THIS UNIT TO STORE AQUARIUMS. CAUTION: CONTAINS SMALL PARTS, KEEP CHILDREN AWAY
DURING INSTALLATION. USE TWO OR MORE PEOPLE TO ASSEMBLE AND MOVE THE UNIT TO AVOID INJURY. Do not use this unit for
anything other than the manufacturer’s intended purpose. Use care when working with metal parts, wear gloves for protecon. Pe-
riodically inspect the unit to ensure brace/beam rivets are properly seated into post slots. Keep this manual for future reference.
Do not exceed the maximum weight capacity of 800 lbs (363 kg) for each shelf, not to exceed 4,000 lbs (1,814 kg) for the enre
shelving unit. Evenly distribute weight loads across enre shelf surface. Always store larger, heavier items on the boom levels and
small lighter items on the upper levels.
Assembly is done with the rivets of the beams and braces ng into the slots of the post. A rubber mallet may be used on the
beams and braces to seat the rivets properly. A hammer can also be used, providing one uses a cloth or a block of wood between
the hammer head and the parts to prevent damage. Tap gently and be sure the rivets are straight and fully engaged.
GENERAL INSTRUCTIONS
PARTS
(F) Post Cap