Manual

UniWire Manual Supplement 35 Muse Research, Inc.
6 From the Connected To menu, select which Receptor you wish to use.
If you have only one Receptor, it will appear automatically in the Connected To menu. If you have multiple Receptors,
the rst will appear, but you can select a different one in the Connected To menu.
7 Set the desired Latency. This setting is global across all UniWire instances.
8 From the Send Data To menu, select which Receptor channel you want to use as an effects processor.
Audio will be sent from Live into this channel for processing.
9 Click the Launch Receptor Remote button to open Receptor’s graphical user interface.
10 Using the channel you selected from the Send Data to menu, assign its Source to UniWire.
11 Assign effect plugins to one or more FX slots (A, B, or C)
12 Play your Live sequence and you should hear audio from the desired Live channel run through the Receptor
effects chain, just as if the effects were running within the host application.
13 Save the Receptor effects chain as either a Single or a Multi patch, so that it will be recalled automatically
when you open your sequence.