Simple Life , Better Home User Manual DESK LAMP MODEL NO. : DL002A +1888 666 9122 customerservice@povison.
DL002A Packing List: Desk Lamp + Base + Metal Parts + Adapter + User Manual + + + Specification Input Voltage 12V Material Metal + ABS+PC Light Source 36pcs LED Power Consumption 10W Luminous Flux 440lm Ra 90 Color Temperature 3000K-5500k Operating Temperature -10~40℃ 2A
DL002A Installation Lamp arm Base Screw Spanner rotate to fasten It’s very easy to install, as shown above: Insert the lamp arm into the lamp holder and tighten it with hexagon screw from the bottom. Product Care 1. Please read the user manual before use. 2. Don't install the lamps above high temperature objects or in damp places. (don't install it above the stove, gas and exhaust pipe to prevent damage.) 3. When the lamp is abnormal, cut off the power supply quickly.
DL002A Button Guide 2 1 1 3 On/Off: Single click the button to turn on/off the light. Double click the button to adjust the color temperature. 2 Reduce brightness: Single click the “-” to reduce brightness. Long press the button for stepless brightness decrease. 3 Improve brightness: Single click the “+” to improve brightness. Long press the button for stepless brightness increase.
DL002A Function Guide Turn on/off Turn on/off the light Short press CCT Adjust color temperature Turn on the light Double click
DL002A Adjust brightness Turn on the light short press the button to improve the brightness long press the button for stepless brightness increase short press the button to reduce the brightness long press the button for stepless brightness decrease Wireless charging Multi-angle adjustments
DL002A NOTICES Please fasten the screw between the base and lamp arm to prevent a loose connection. After connecting to power supply, the touch button of the on/off button is on. When the phone is charging, the touch button flashes regularly. When the phone doesn’t match with the wireless charger, the touch button flashes quickly.
DL002A FCC STATEMENT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.