User Manual

12 iP300 Quick Start Guide 13
Bluetooth Control
A dedicated iOS control app for TURBOSOUND Bluetooth speakers can be downloaded from the Apple Store.
This iOS control app can be used with Bluetooth pairing, or without pairing if only analogue inputs are used.
Operation with Bluetooth Pairing
• In both mono and stereo mode, first pair the MASTER speaker, and then launch the iOS control app.
• The iOS control app will automatically detect and adapt for mono or stereo mode.
• To alter the speaker settings, swipe the screen or press the settings icon. All iP speaker settings can be accessed from the iOS control app.
Operation without Bluetooth Pairing (Analogue Input Only)
• Power on the first (usually left-hand) speaker – this speaker will become the MASTER speaker.
• Start the control app on the IOS device.
• Check that the app is connected and functioning with the single MASTER speaker.
• Power up the second speaker – this speaker becomes the SLAVE speaker.
• Check that the app’s Main Page shows both MASTER and SLAVE input and balance control.
Main Page (1 speaker) Main Page (2 speakers linked) Settings Page
DFU Firmware Update
Where possible please update your iP300 firmware using the iOS app.
To update, go to the Settings screen in the app and look for the “CURRENT FIRMWARE” section. This section of the Settings screen will show the current firmware
version. If a firmware update is needed, the screen will display this option
:
• Swipe the update slider toward the right to initiate the firmware update. The update may take several minutes.
• Update progress will be displayed on the app and the iP300 speaker’s DSP screen.
Firmware Update Fallback Procedure
In the event you are unable to update the firmware using the iOS or Android app, you may also carry out the update using this fallback procedure:
1. Download the .dfu file with the new firmware version to your smartphone.
2. Force your iP300 speaker into DFU update mode by following these steps:
a. Power off the speaker.
b.
Hold the ENC
ODER KNOB.
c. Power on the speaker.
d. Please select the option “Firmware upgrade” then press the ENCODER KNOB.
e. When you are successful, the DSP scree
n will show the system is ready for the firmware upgrade.
3. On your smartphone, select and hold the .dfu file until the smartphone offers options for file transfer.
4. Select your smartphone’s function for sharing via Bluetooth.
5. Select the iP300 speaker for Bluetooth shar
ing (e.g., “HUAWEI P7-L07”).
6. When the download begins, the DSP screen will show the download progress.
7. When the download is complete, the speaker will auto-restart and boot the new firmware.
IMPORTANT NOTE: The mounting of a permanently installed sound system may be dangerous unless undertaken by qualified personnel with the required experience
and certification to perform the necessary tasks. Walls, floors or ceilings must be capable of safely and securely supporting the ac
tual load. The mounting accessory
used must be safely and securely fixed both to the loudspeaker and to the wall, floor or ceiling.
When mounting rigging components on walls, floors or ceilings, ensure that all fixings and fasteners used are of an appropriate size and loa
d rating. Wall and ceiling
claddings, and the construction and composition of walls and ceilings, all need to be taken into account when determining whether a particular fixing arrangement
can be safely employed for a particular load. Cavity plugs or other sp
ecialist fixings, if required, must be of an appropriate type, and must be fitted and used in
accordance with the maker’s instructions.
The operation of your speaker cabinet as part of a flown system, if installed incorrectly and improperly, can potentially expose persons to se
rious health risks and
even death. In addition, please ensure that electrical, mechanical and acoustic considerations are discussed with qualified and certified (by local state or national
authorities) personnel prior to any installation or flying.
Make sure that speaker cabinets are set up and flow
n by qualified and certified personnel only, using dedicated equipment and original parts and components
delivered with the unit. If any parts or components are missing please contact your Dealer before attempting to set up the system.
Be sure to observe the local, sta
te and other safety regulations applicable in your country. MUSIC Group, including the MUSIC Group companies listed on the enclosed
“Service Information Sheet”, assumes no liability for any damage or personal injury resulting from improper use, installation or operation of the produc
t.
Regular checks must be conducted by qualified personnel to ensure that the system remains in a secure and stable condition. Make sure that, where the speaker is
flown, the area underneath the speaker is free of human traffic. Do not fly the speaker in areas th
at can be entered or used by members of the public.
Speakers create a magnetic field, even if not in operation. Therefore, please keep all materials that can be affected by such fields (discs, computers, monitors, etc.)
at a safe distance. A safe distance is usually bet
ween 1 and 2 metres.