User`s manual

5
a35.2 integrated amplifiera35.2 integrated amplifier
Speaker Outputs
To avoid damage to the a35.2, make sure it is plugged into an AC outlet while
connecting up or disconnecting speaker wire to the speaker outputs. The a35.2 has one
pair of speaker outputs on the back labeled SPEAKER OUT R (right) and L (left). Using a
suitable speaker wire, connect the right speaker to the R SPEAKER OUT and the left
speaker to the L SPEAKER OUT. Pay careful attention to match the positive (red) and
negative (black) terminals on your speakers to the positive (red) and negative (black)
terminals on back of the a35.2.
NOT
Connecting to the Mains - Plugging In
Check that the Power Switch on front of the a35.2 is in the position. Push the plug
(IEC line socket) of the power cable supplied with the a35.2 into the socket (POWER
INPUT) on back of the unit. Make sure it is pressed in firmly. Plug the other end of the
power cable into an AC wall outlet.
off
Using the a35.2
power - on/off
Push this button on the front of the a35.2 to turn the unit . When the a35.2 is the
display will show the input that is currently selected and the volume level. Pushing it
again will switch the a35.2 .
on on
off
phones
Use this input for headphones. When headphones are in use the speaker output is
automatically muted.
input knob
Turn the input knob to the right or left to select the desired input.
on/off
rec. monitor
input volume
phones
a 35.2 integrated amplifier a 35.2 integrated amplifier