Instruction manual

Parts Inventory and Operation Control Diagram

1. 3 x removable transport screws

2. 1 x stepped motor pulley

3. 1 x drive belt (packaged in parts bag)

4. 1 x sub-platter

5. 1 x platter with felt mat (packaged in bottom of box)

6. 1 x tonearm counterweight (packaged in carton foam) with attached tracking force

scale (6a)

7. 1 x tonearm lift lever/cueing lever

8. 1 x tonearm rest

9. 1 x tonearm

10. 1 x dust cover

11. 2 x dust cover hinges

12. 4 x dust cover hinge screws

13. 1 x mains wire connected to wall transformer (in a small white box set into the

underside of the packing foam)

14. 1 x audio cable

15. 1 x anti-skating rod

16. 1 x anti-skating weight (packaged inside the parts bag)

17. 1 x anti-skating hanger

18. 1 x removable tonearm locking strap or tie

19. 1 x belt changing tool (packaged in parts bag)

20. 1 x mains switch

21. 1 x headshell fitted with a Goldring cartridge

22. 1 x motor

23. 2 x threaded screws

24. bubble level

25. adjustable feet (mmf-7.1 foot pictured)

26. spike protectors (used on mmf-7.1)

27. turntable output connectors

Parts bag includes:

1 x 45 rpm adapter

1 x drive belt (3)

1 x anti-skate weight (16) (tiny weight attached to small piece of fishing line)

1 x belt changing tool (19)

1 x Allen Key to adjust tonearm VTA

1 x high quality interconnect cable (14)

1 x record clamp

1 x cartridge alignment guide

1 x instruction manual

1pr. x white gloves