Owner's Manual

6
GETTING STARTED
Thank you for purchasing the music hall mmf-5.3 turntable. The music hall mmf-
5.3 turntable is a 2-speed, belt driven turntable with many singular features.
It has an original and unique 2-plinth design with six viso-elastic cones separating
the bottom platform from the top. This gives the turntable an extra level of
isolation. The compliant feet, 2-speed synchronous motor, switch, wiring and
electrical parts are on the bottom plinth while the critical sound reproducing
components, the bearing, arm and cartridge are mounted on the top platform.
The dynamically balanced alloy platter and felt mat sit on a high quality, stainless
steel ball bearing sheathed in Teflon providing fluid and noise-free operation. The
bearing assembly comes pre-charged with lubricant. A metal screw-on record
clamp is standard equipment as is the round spirit level.
The effective length of the tonearm is nine inches. This allows for a very shallow
tracking arc on the record thus reducing distortion. The tonearm comes mounted
with a high quality moving magnet cartridge.
These features combine to ensure that the mmf-5.3 delivers superior audio
performance that will provide years of enjoyment.
FOR YOUR INFORMATION
This manual provides valuable information that will help you get optimum
performance from your system. Please contact your authorized music hall dealer
for any additional clarifications you may require. Save the music hall mmf-5.3
shipping carton and all enclosed packing material for future use. Shipping
or moving the mmf-5.3 in anything other than the original packing material
may result in severe damage that is not covered by the warranty. Be sure
to keep the original sales receipt; it is your best record of the date of purchase,
which you will need in the event warranty service is required.
SET-UP