Owner's Manual

PARTS INVENTORY AND OPERATION CONTROL DIAGRAM
1. 3 x removable transport screws
2. 1 x stepped motor pulley
3. 1 x drive belt (packaged in parts bag)
4. 1 x sub-platter
5. 1 x platter with felt mat (packaged in bottom of box)
6. 1 x tonearm counterweight (located in packing material)
7. 1 x tonearm lift lever/cueing lever
8. 1 x tonearm rest
9. 1 x tonearm
10. 1 x dust cover
11. 2 x dust-cover hinges
12. 4 x dust-cover hinge screws
13. 1 x mains cable connected to wall transformer
14. 1 x removable high quality interconnect cable (included in parts bag)
15. 1 x anti-skating rod
16. 1 x anti-skating weight (packaged in parts bag)
17. 1 x anti-skating hanger
18. 1 x removable tonearm-locking strap (red plastic)
19. 1 x belt changing tool (packaged in parts bag)
20. 1 x on/off switch
21. 1 x head shell fitted with Goldring Eroica H (high output moving-coil cartridge)
22. 1 x motor
23. 3 x threaded screws
24. bubble level
25. adjustable spiked feet
26. spike protectors
27. turntable output connectors
Parts bag includes:
1pr. x white gloves
1 x 45 rpm adapter
1 x drive belt (3)
1 x anti-skate weight (16) (tiny weight attached to small piece of fishing line)
1 x belt changing tool (19)
1 x Allen key to adjust arm lift
1 x Allen key to adjust VTA (this one has a slight bend in it)
1 x record clamp
1 x high quality interconnect cable (14)
3 x adjustable spiked feet (25)
4 x spike protectors (26) (flat dime looking object that spike sits on)
1 x cartridge alignment guide
1 x instruction manual