music hall pa1.2 INSTRUCTION MANUAL music hall http://www.musichallaudio.
CONGRATULATIONS ON YOUR PURCHASE You have selected an exceptional phono preamplifier. Each component used in the construction of the pa1.2 was selected to provide you with superior performance and the highest level of sound reproduction available today. We know of no phono preamplifier that costs as much to produce yet sells for so little. The precise and elegant design of this phono preamplifier makes it easy to install and operate.
5. Climate The phono preamplifier has been designed for use in moderate climates. Do not attempt to use below 41 degrees Fahrenheit (5 degrees Celsius) or above 95 degrees Fahrenheit (35 degrees Celsius). 6. Racks and Stands Place the phono preamplifier on a fixed, level surface strong enough to support its weight. Do not place it on a moveable cart that could tip over. We recommend only using stands approved for use with audio equipment. 7. Cleaning A soft towel can be used. 8.
GETTING STARTED Thank you for purchasing the Music Hall pa1.2 phono preamplifier. This manual provides valuable information that will help you get optimum performance from your system. Please contact your authorized Music Hall dealer for any additional clarifications you may require. Save the shipping carton and all enclosed packing material for future use. Shipping or moving the pa1.2 in anything other than the original packing material may result in severe damage that is not covered by the warranty.
Connection to the Amplifier Connect the OUT of the pa1.2 to a line input (i.e. AUX, CD, TUNER, etc.) on your amplifier. Take care to connect the left and right channels correctly. Make all connections while the phono box is disconnected from the power supply. *Do not connect the pa1.2 to a phono input.* Mains Connection The pa1.2 is supplied with a power supply suitable for your country's mains supply. Check the label before connecting to ensure compliance with the mains rating in your house.
TROUBLESHOOTING Music Hall phono preamplifiers are manufactured to the highest standards and undergo strict quality controls before leaving the factory. If, for some reason your phono preamplifier is not working properly, please take a few moments to review this list of potential causes. NO SIGNAL IN ONE OR BOTH CHANNELS: The phono preamplifier is not connected to the mains power supply. No mains at the socket. No connection between the phono preamplifier and amplifier.
SERVICE Should you encounter a problem that you cannot solve, please contact your Music Hall dealer. Never return a phono preamplifier without authorization and without safely disconnecting it and correctly packing it in the original packaging. Repairs will only be made under warranty if the unit is returned correctly packaged in its original box. WARRANTY This entitles you to have the Music Hall pa1.
FOR FURTHER INFORMATION CONTACT: Music Hall 108 Station Road Great Neck, NY 11023 Tel: 516-487-3663 Fax: 516-773-3891 http://www.musichallaudio.
