Instruction manual

CAUTION: To reduce the risk of electric shock, do not remove any cover.
No user-serviceable parts inside. Refer servicing to qualified service
personnel only.
The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use to the
presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock.
The exclamation point within the equilateral triangle is intended to alert the user to the presence of important
operation and maintenance (servicing) instructions in the literature accompanying this appliance.
CAUTION
To prevent electric shock, do not use this polarized plug with an extension cord, receptacle or other outlet unless the
blades can be fully inserted to prevent blade exposure.
LINE VOLTAGE SELECTION
Just for dual voltage mode only! Because power supplies vary from
location to location we have incorporated a selectable power supply.

The desired voltage may be set with the VOLTAGE SELECTOR
switch located under the platter. (use a flat head screw driver).

Do not force the VOLTAGE SELECTOR switch as this may cause
damage.
 If the VOLTAGE SELECTOR switch does not move smoothly, please
contact a qualified service technician.
BEFORE USE
 Check for the following parts included in the package with the main unit:
 Platter
 Slipmat
 Headshell
 Cartridge
 USB cable
 Counter weight
 DISC
 RCA cable
 Dust cover
 45 rpm adaptor
 Instruction manual

Very Important!
Do not forget to attach rubber belt to motor for correct operation. After placing the
Turntable Platter onto the turntable through the Center Spindle, move one of the
large windows on the Platter to top right corner. Attach rubber belt around motor.
(Rubber belt is already attached to the underside of the Turntable Platter.)
 Notes:
1. Do not connect the AC power plug before assembly has been completed.
2. Before turning the power on, make sure once again all the connections and power voltage settings are correct.
Always turn off the power when connecting or disconnecting.
3. Read this manual carefully before using the unit .Be sure to store the manual in a safe place for future reference.
DO NOT OPEN
RISK OF ELECTRIC SHOCK
2