Instructions

First use
Connect the charging box with the USB-C cable and a USB
power adapter* (*not included in the delivery). Wait until the box
is full charged.
Bluetooth connection
Pairing
Take the BT-X52 earbuds out of the charging box. Both earbuds
turn on automatically and start the pairing mode.
After it prompts “power on” the indicator
LED flashes red and green in change.
Start the Bluetooth scan function with
your Smartphone / Tablet or any other
Bluetooth enabled device.
Click on “MusicMan BT-X52” in the
Bluetooth settings to pair your device with
the earbuds.
Reset pairing
Take out the right BT-X52 earbud from the charging box and hold
10 seconds the touch-function surface to clear the pairing
settings. The indicator LED will blink red 5 times. Put the earbud
into the charging box. Take out both earbuds to restart the pairing
mode.
Single use of BT-X52 (Only R earbud)
Take the right earbud out of the charging box. It switches on
automatically. Note: The left earbud cannot be used singly for
music and calls.
Auto reconnection
The BT-X52 headphone will reconnect to the last paired mobile
phone automatically. To change the paired connection to another
mobile phone, reset the pairing.
MusicMan BT-X52