Specifications

A3.2 Tuner Instructions for Use Page 5 of 9
Issue 1: March 2002
FACILITIES AND CONNECTIONS
CAUTION
MOUNT UNIT ON SOLID SURFACE. DO NOT REMOVE SCREWS OR COVERS
UNDER ANY CIRCUMSTANCES. NO USER SERVICEABLE COMPONENTS
INSIDE. REFER SERVICING TO QUALIFIED ENGINEER. SEE OWNERS
MANUAL FER FURTHER INFORMATION.
THIS PRODUCT COMPLIES WITH DHHS RULES 21 CFR. CHAPTER 1, SUBCHAPTER J, PART 1040 AT DATE OF MANUFACTURE
THIS PRODUCT COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO TWO CONDITIONS.
1. THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
2. THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION
SERIAL
NUMBER
THIS APPLIANCE
MUST BE
EARTHED
IMPORTANT
50/60Hz
CC
MANUFACTURED BY MUSICAL FIDELITY LTD, 15-17 OLYMPIC TRADING ESTATE
FULTON ROAD, WEMBLEY, MIDDLESEX, HA9 0TF, ENGLAND
RIGHT AUDIO
OUTPUT
LEFT AUDIO
OUTPUT
POWER CONSUMPTION 10W
REMOTE CONTROL
(Only tuner functions are shown -
remaining buttons are for other
Musical Fidelity products).
8 DISPLAY button (see page 7)
9 MODE button (see page 6)
10 STORE button (see page 6)
11 MONO / STEREO button
12 SIGNAL strength button (see page 7)
13 LOCAL / DX button (see page 7)
14 TUNE -up button
15 TUNE -down button
16 RDS on / off button (see page 7)
POWER
MUSICAL FIDELITY A3.2 RDS TUNER
STORE MODE TUNE MONO/STEREO
8
9 10
15
11
12
13
14
FRONT PANEL
1 POWER mains on/off switch
2 Tuner display (incorporates
infra-red remote control receiver)
3 STORE button (see page 6)
4 MODE button (see page 6)
5 TUNE -down button
6 TUNE -up button
7 MONO / STEREO button
REAR PANEL
17 75 ohm AERIAL socket
18 RIGHT AUDIO OUTPUT
19 LEFT AUDIO OUTPUT
20 IEC type mains inlet
17 18 19 20
1 2 3 4 5 6 7
16