Specifications

OPERATION
A3
CR
preamplifier Instructions for Use. Page 7 of 9
issue 2/12.10.2000
OFF TAPE MONITORING
In conjunction with a 3-head cassette deck,
off-tape monitoring allows the user to
compare the recorded to original sound
whilst a recording is made. To do this,
first select the required source in the nor-
mal way and start recording. The Tape
Monitor button on the front panel can now
be used to switch between the source sig-
nal and the recorded signal allowing direct
comparison.
The red LED just above the tape monitor
button indicates that tape monitor is select-
ed.
Note that tape (the recorded signal) is
selected when the LED is lit. On some 3-
head cassette decks there is an additional
'tape/source' switch which will need to be
in the 'tape' position for the above to work
If you are in any doubt consult your tape
machine's manual or your dealer.