Specifications

power amplifier Instructions for Use. Page 6

of 7

TROUBLESHOOTING

issue 1 08/02/00

Problem Probable Cause Remedy

No power when POWER

is pressed

Mains plug not inserted

correctly

Plug in securely

No sound Volume control is set to

minimum

Turn up the volume

No connection between pre

and power amps

Make appropriate

connection

Speakers are not connected,

or are connected incorrectly.

Check speaker cables

Sound is not precise,

lacking in bass and stereo

image

Speakers are connected out

of phase

Make sure that both

speakers are connected

correctly

Basic troubleshooting of an amplifier is similar to troubleshooting of any other electrical

or electronic equipment. Always check the most obvious possible causes first. To give

you a few ideas of what to look for, check the following:

If none of these actions effect a cure, please contact your dealer, or an authorised Musical

Fidelity service agent. Remember, never open the case of the A3

power amplifier

yourself, as this will invalidate the guarantee.