Specifications

SPECIFICATIONS
Issue 2 Page 13 of 14
Output
Output impedance 50 ohms balanced or single ended
Output, digital 0dB level XLR output - 4.4V r.m.s. balanced nominal
RCA output - 2.2V r.m.s. single ended nominal
DAC (balanced and single-ended outputs)
DAC circuit Quad DAC 192 kHz fully balanced over-sampling
Total correlated jitter <15 picoseconds peak to peak
Linearity <0.1dB down to -96dB
Frequency response 10Hz to 20 kHz -0.2dB max.
Channel separation >105dB 20 Hz to 20 kHz
Signal-to-noise ratio >117dB “A”- wtd.
Total harmonic distortion <0.003% 10Hz to 20 kHz
Connections
Line level outputs 1 pair line level RCA connectors, left and right outputs
1 pair line level XLR connectors, left and right outputs
Digital outputs 1 RCA coaxial connector SPDIF
1 TOSLINK optical connector
1 XLR AES output connector
Digital inputs 1 RCA coaxial connector SPDIF
1 TOSLINK optical connector
1 XLR AES input connector
Power requirement
Mains voltages 115/230VAC 50/60Hz (factory pre-set)
100VAC 50/60Hz (alternative)
Consumption 25 Watts maximum
Weight
Unit only, unboxed 11.2 kg (24⅔ lbs)
In shipping carton 15.5 kg (34 lbs)
Dimensions
Wide 440 mm (17⅓”)
High, including feet 125 mm (5”)
Deep (front to back) including terminals 385 mm (15⅛”)
Standard accessories
IEC type mains lead (10-Amp type)
AMSCD remote control
VARTA Lithium Li-Mn button type CR2450
Musical Fidelity reserves the right to make improvements which may result in
specification or feature changes without notice.