Specifications

Issue 2 : February 2005
kW Hybrid Line Preamplifier Instructions for use Page 5 of 9
REMOTE CONTROL
The blue buttons on the remote control enable main functions of the preamplifier to be operated
from a convenient distance. Remaining buttons on this universal handset are for use with other
Musical Fidelity products, and have no effect on the kW Hybrid Line Preamplifier.
Equivalent buttons on the remote handset have the same functions as those on the front panel of the
unit.
As the remote control uses an invisible infra-red light beam, the transmitter must be pointed directly
towards the receiver window on the front of the amplifier, without visual obstruction between them.
Pressing the volume-up or -down buttons on the remote handset will turn the motorised volume
control in the required direction.
Pressing the MUTE button disables the OUTPUT sockets, but not does not affect TAPE RECORD
output. A red mute LED on the front panel lights to show that the pre-amplifier is not producing an
audio signal for the amplifier. Pressing the MUTE button again cancels mute function, and the red
LED goes out.
If the range of the remote control greatly decreases, replace the batteries with new ones. Do not
mix old and new batteries - two are required, type SUM-4, AAA or LR03.
Do not dispose of used batteries in a fire.
(Preamplifier function buttons only
:)
AUXiliary input select
CD input select
SACD input select
TUNER input select
VOLUME (up)
VOLUME (down)
TAPE MUTE
input select button
Home Theatre DIRECT
input select (see page 6)