Specifications
UPSAMPLING
1
ml
0/A
CONVERTOR
Installation, Precautions & User Information
GENERAL ADVICE
This new
M1
DAC is designed and built to provide trouble-free performance, but
as
with
all
electronic devices it
is
necessary to observe a few precautions:
•
Heed
all
warnings shown
on
the back of the product.
• Only connect the M 1 DAC to a mains outlet having the same voltage
as
marked at the back of the unit.
Always ensure that when disconnecting
and
reconnecting your audio equipment the mains supply
is
switched off.
• Position the mains lead and signal interconnects where they are not likely
to
be
walked
on
or trapped
by
items placed
on
them.
•
Do
not use near water, or place water-filled containers
on
the
M1
DAC, for example, a flower vase or potted
plants.
If
water
does
spill
inside, immediately pull
out
the
mains
plug from the wall
socket
and
inform
the dealer,
who
should
then check the
unit
before
further
use. Entry
of
liquid
into
the
M1
DAC
is
dangerous, and
may
cause electric
shock
or
fire hazard.
•
Do
not place the unit near direct heat sources such as radiators, direct sunlight or other equipment.
•
Do
not remove any covers or try
to
gain access
to
the inside. There are
no
user adjustments or fuses
to
change without qualification. Refer
all
service work to
an
authorised Musical Fidelity agent.
*Note:
Unauthorised
opening
of
the
equipment
will
invalidate
any
warranty claim.
• Dust regularly with a soft cloth or soft brush but
be
careful when using cleaning or polishing agents - they
may harm the surface finish.
The electronics
in
modern hi-fi equipment
is
complex and may, therefore,
be
adversely affected or damaged by
lightning. For protection of the audio system during electrical storms, remove the mains plugs.
If after-sales service
is
required, to help the dealer identify the
M1
DAC please quote the serial number located
on
the rear panel of the unit.
M1
DAC issue 5
MUSICAL
FIDELITY
Page 4
of
11