Specifications

RENAMING INPUTSRENAMING INPUTS
Issue 4 Page 17 of 47
Renaming an input
For fu
rther convenience the inputs may be renamed to suit the particular setup; and make choosing the right
input easier. All inputs can be renamed with custom names up to 16 characters (including symbols and spaces).
To rename an input, enter the "select input" menu by pressing the selector knob. The renaming feature uses
the M1 SDAC remote CD player section grey buttons in addition to the blue DAC buttons.
Rotate the selector knob to show the input to be renamed opposite the blinking cursor on the top line of the
display.
Then press the ◄ or ► button on the remote controller.
RENAME INPUT
AUXILIARY
1
©AUXILIARY 1
AUXILIARY 1
©
The default n
ame of the input will be shown in the top line of the display. Using the remote numeric keypad, the
input can then be given a new name.
Input the letters/characters desired by pressing the alphanumeric keys on the M1 SDAC remote. Pressing the
“2” button once, for example produces
A
AUXILIARY 1
and then q
uickly pressing “2” button twice more gives
after a short pause, the cursor moves over ready for next letter input.
COAXIAL 1
AUXILIARY 1
C
All the n
umber keys 0-9 function in a similar manner to produce the required letters, numbers and selected
characters as indicated on and above the keys.
Note: SPACE is the 1
st
character on the “1” button!
CDD
COAXIAL 1
To delete a
n incorrect character use the ◄ button. The cursor jumps back a character automatically clearing the
character that was there before, ready for a new character to be input.
COAXIAL 1
CD
For lower cas
e letters, press ▲ button. This button has a “toggle” action, so to revert to upper case, simply
press it once again
COAXIAL 1
CD
Pl
a
y
er
Once the
complete name has been typed in, confirm the new text by pressing OK on the remote or pressing the
selector knob.