Specifications

Issue 4 Page 10 of 17

PAUSE 1

STOP 7

PLAY 1

STOP. 1

LOADING AND PLAYING COMPACT DISCS

Switch on unit. To load a CD gently introduce the CD into the slot in the front panel. The mechanism will sense

the presence of the CD and draw it in automatically.

There is no need to use any force, if a CD does not go in, please check there is no CD already in the unit, then

refer to the troubleshooting section P.15.

If a CD is already inside at switch-on, the table of contents will be read and the disc will then be ready to play.

The unit will scan the contents of the disc. After a short delay, the display window then shows the total number

of tracks available on the CD, and total playing time. In the following example there are 7 tracks, lasting a total

of 41 minutes 56 seconds

PLAY

►|▐▐

If ►|▐▐ button on front panel is pressed, the unit will begin playing from track 1, confirmed by the word PLAY

appearing on the left of the display, with 1 in the centre and elapsed time on the right.

When all tracks on the CD have been played, the display shows STOP and total number of tracks on the disc.

PAUSE

►|▐▐

Pressing the

►|▐▐ button on front panel when disc is playing will halt playback. PAUSE appears in the display

windows instead of PLAY. The disc will continue spinning, but the track does not advance and the CD's output

is muted. Pressing

►|▐▐ again resumes playback from the same place.

PAUSE (Remote control)

On the remote control, PLAY

►and PAUSE ▐▐ buttons have separate functions at each end of the same button.

Pressing

► will only control disc play, and pressing ▐▐ will not resume play.

STOP

█

Playback can be stopped at any time by pressing the █ button on front panel. On the remote control, press

either end of the button, not the middle part.

EJECT

▲

The CD may be removed by pressing the ▲ button on the front panel at any time. The CD will come out of the

slot to approx 2/3rds of the way to allow easy removal.

Note: If the CD is ejected but not removed, it will be retracted back into the mechanism for safety after a few

seconds. After the contents have been scanned, the CD is ready to be played or ejected again.

READING...

OPERATION