Specifications
.--.--
....
--.------------.
"'---1
HEADPHONE
I
ml
[}{]®®
i
AMPLIFIER
lrlJU
i
'---------------j
GENERAL ADVICE
Installation,
Precautions
& User
Information
This new
M1
HPA
is
designed and built
to
provide trouble-free performance, but
as
with all electronic devices it
is
necessary to observe a few precautions:
o Heed all warnings shown
on
the back of the product.
o Only connect the
M1
HPA
to
a mains outlet having the same voltage as marked at the back of the unit.
Always ensure that when disconnecting and reconnecting your audio equipment the mains supply is
switched off.
o Position the mains lead and signal interconnects where they are not likely
to
be
walked
on
or trapped
by
items placed
on
them.
o
Do
not use near water, or place water-filled containers
on
the
M1
HPA, for example, a flower vase or potted
plants.
If
water does
spill
inside, immediately pull
out
the mains plug
from
the wall
socket
and inform
the dealer,
who
should
then check the
unit
before
further
use. Entry
of
liquid
into
the
M1
HPA is
dangerous, and may cause electric
shock
or
fire hazard.
o
Do
not place the unit near direct heat sources such
as
radiators, direct sunlight or other equipment.
o
Do
not remove any covers or try
to
gain access
to
the inside. There are no user adjustments or fuses
to
change without qualification. Refer
all
service work
to
an
authorised Musical Fidelity agent.
* Note: Unauthorised
opening
of
the
equipment
will
invalidate
any
warranty
claim.
o Dust regularly with a soft cloth or soft brush but
be
careful when using cleaning or polishing agents - they
may harm the surface finish.
The electronics
in
modern hi-fi equipment is complex and may, therefore,
be
adversely affected or damaged
by
lightning. For protection of the audio system during electrical storms, remove the mains plugs.
If after-sales service
is
required,
to
help the dealer identify the
M1
HPA please quote the serial number located
on
the rear panel of the unit.
M1
HPA issue 2
MUSICAL
FIDELITY
Page 4
of
11