Owners Manual
M3SCD issue 1 Page 18 of 20
Output
Output impedance 50 ohms
Output, digital 0dB level RCA output 2.2V R.M.S. nominal
DAC
DAC circuit 24 bit Delta-Sigma (bit stream) dual differential 8x over-sampling
Up sampled to 192 KHz
Total correlated jitter <135 picoseconds peak to peak
Linearity <0.1 dB down to -96 dB
Frequency response 10Hz to 20 kHz -0.2 dB max.
Channel separation >105 dB 20 Hz to 20 kHz
Signal-to-noise ratio >117 dB “A”- wtd.
Total harmonic distortion <0.003% 10Hz to 20 kHz
Connections
Audio outputs 1 pair RCA left and right line level outputs
Digital outputs 1 RCA coaxial SP/DIF up to 192 kHz 24 bit
1 optical SP/DIF up to 96 kHz 24 bit
Digital inputs 1 RCA coaxial SP/DIF up to 192 kHz 24 bit
1 optical SP/DIF up to 96 kHz 24 bit
1 USB async type B up to 96 kHz 24 bit
Trigger input 3.5mm (⅛”) mono jack ±4.5 to ±15V DC
Trigger output 3.5mm (⅛”) mono jack +12V DC
Power requirement
Mains voltages 90-250 VAC 50-60Hz universal
Power consumption 20 Watts maximum (blue PWR LED lit)
Less than 0.5W in standby (orange STBY LED lit)
Weight
Unit only, unboxed 6.05 kg (13⅓ lbs)
in shipping carton 9.9 kg (21¾ lbs)
Dimensions
Wide 440 mm (17⅓”)
High, including feet 100 mm (4”)
Deep (front to back) inc. terminals 380 mm (15”)
Standard accessories
IEC type mains lead (10-Amp type)
M3s remote control
Batteries, LR03 or AAA, manganese alkaline type - 2 off
Musical Fidelity reserves the right to make improvements which may result in
specification or feature changes without notice.
SPECIFICATIONS