Specifications

Issue 1 Page 13 of 14
SPECIFICATIONS
Output RCA single ended XLR balanced
Voltage 9.5Vrms 19Vrms
26V peak to peak 52V peak to peak
Output impedance 47Ω 47Ω
Line inputs
THD+N, 20Hz to 20 kHz <0.005% <0.004%
Signal / noise ratio >96dB ‘A’-weighted >96dB ‘A’-weighted
Input sensitivity for full output 2.2V 4.4V
Input impedance 75KΩ 150KΩ
Overload margin 12dB 12dB
Channel separation >96dB >96dB
Frequency response +0, –1dB, 10Hz to 80 kHz
Phono inputs
-20.0
-15.0
-10.0
-5.0
0.0
5.0
10.0
15.0
20.0
20.0 31.5 50.0 80.0 125 200 315 500 1000 1600 2500 4000 6300 10000 16000
RIAA
PHONO
RIAA/IEC
PHONO RESPONSE
Frequency (Hz)
dB
Input sensitivity 3.5mV (MM) 440µV (MC)
Frequency response RIAA/IEC see graph
Signal / noise ratio 81dB ‘A’-weighted
Input impedance 47KΩ
Overload margin 29dB
Connections
Phono MM/MC inputs 1 pair MM/MC level RCA connectors
Line inputs 2 pairs line level XLR (balanced) connectors
4 pairs line level RCA connectors
Line outputs 1 pair line level RCA connectors, constant level TAPE outputs
1 pairs line level XLR (balanced) connector outputs
1 pair line level RCA connector outputs
USB input USB type “B” (square) socket
Power requirement
Mains voltages 115/230VAC 50/60Hz (factory pre-set)
100VAC 50/60Hz (alternative)
Consumption 15 Watts
Weight
Unit only, unboxed 11.4 kg (25 lbs)
In shipping carton 16 kg (35¼ lbs)
Dimensions
Wide 440mm (17⅓ ”)
High, including feet 126mm (5 ”)
Deep (front to back) including terminals 400mm (15¾ ”)
Standard accessories
IEC type mains lead (10-Amp type)
M6PRE remote control
Batteries, LR03 or AAA, manganese alkaline type - 2 off
Musical Fidelity reserves the right to make improvements which may result in
specification or feature changes without notice.