Owners Manual

Issue 1 Page 13 of 14
SPECIFICATIONS
Output RCA single ended XLR balanced
smrV5.9 egatloV 19Vrms
26V peak to peak 52V peak to peak
Output impedance
Line inputs
THD+N, 20Hz to 20 kHz <0.005% <0.004%
Signal / noise ratio >96dB ‘A’-weighted >96dB ‘A’-weighted
Input
sensitivity for full output
2.2V 4.4V
Input
impedance
Overload margin 12dB 12dB
Channel separation >96dB >96dB
Frequency
response +0, –1dB, 10Hz to 80
kHz
Phono inputs
-20. 0
-15. 0
-10. 0
-5. 0
0. 0
5. 0
10. 0
15. 0
20. 0
20 . 0 31.5 50.0 80.0 125 200 31 5 500 100 0 1 600 2500 4000 630 0 10000 16000
RIA A
P HO NO
RIAA/IEC
P H ON O RES P ONS E
F re que n cy (H z)
dB
Input sensitivity 3.5mV (MM) 440µV (MC)
Frequency response RIAA/IEC see graph
Signal / noise ratio 81dB ‘A’-weighted
Input impedance
Overload margin 29dB
Connections
Phono MM/MC inputs 1 pair MM/MC level RCA connectors
Line inputs 2 pairs line level XLR (balanced) connectors
4 pairs line level RCA connectors
Line outputs 1 pair line level RCA connectors, constant level TAPE outputs
1 pairs line level XLR (balanced) connector outputs
1 pair line level RCA connector outputs
USB input USB type “B” (square) socket
Power requirement
Mains voltages 115/230VAC 50/60Hz (factory pre-set)
100VAC 50/60Hz (alternative)
51 noitpmusnoC Watts
Weight
Unit only, unboxed 11.4 kg (25 lbs)
In shipping carton 16 kg (35¼ lbs)
Dimensions
Wide
High, including feet 126mm (5 ”)
Deep (front to back) including terminals 400mm (15¾ ”)
Standard accessories
IEC type mains lead (10-Amp type)
M6sPRE remote control
Batteries, LR03 or AAA, manganese alkaline type - 2 off
Musical Fidelity reserves the right to make improvements which may result in
specification or feature changes without notice.