Specifications

Issue 2 Page 8 of 13
The universal remote control shown below enables functions from this and related units to be operated from a
convenient distance.
Equivalent buttons on the remote control have the same functions as those on the front panel of the unit. Other
functions are only available by remote control.
As the handset uses an invisible infra-red light beam, the front edge must be pointed directly towards the
receiver window at the front of the player, without visual obstruction between them.
If the range of the remote control greatly decreases, replace the batteries with new ones. Do not mix old and
new batteries – two are required, size AAA, LR03 or SUM-4.
Please dispose of used batteries in accordance to local regulations.
Amplifier section
DISPLAY – dims display
PHONO - selects phono input
CD - selects CD input (on amplifier)
AUX1- selects AUX1 input
AUX2/HT - selects AUX/HT input
BAL 1 /HT- selects balanced1/HT input
BAL 2 - selects balanced 2 input
CD Player DAC-input section
SPDIF – selects COAX input
OPTICAL – selects OPTICAL input
DISPLAY – dims display
0-9 Buttons – Used to select track
numbers
CHECK – check pre-programmed tracks
PROGRAM – programs selection and
order of tracks
INTRO – plays first 10 seconds of each
track
REPEAT – repeats whole disk or selected
tracks
SEARCH – fast forward/backward through
track
STOP – Stop playing/Eject CD
MUTE - mutes Preamp outputs
(until pressed again).
TUNER - selects TUNER input
VOLUME ▲ - increases volume
VOLUME ▼ - reduces volume
TAPE - selects TAPE input
CD – Selects CD player internal
mechanism
AES-USB – selects XLR input or
USB input (CD player dependant)
TIME – displays track time/time
remaining
CLEAR – clears selected pre
programmed track
A/B sets repeat start/end to repeat
section of track
SHUFFLE – plays back tracks in
random order
TRACK – next/previous track
PAUSE/PLAY – stop/start CD
playback
REMOTE CONTROL
HANDSET